Product number: HST7

A 'rectangular' Portal frame and an 'S' frame made from rectangular solid steel section are provided with either pinned ends or simple supports to enable each frame to be set up in the HST1 Universal Frame and Stand (sold separately) and loaded horizontally and vertically. One end of the portal frame pivots on a knife edge, while the other end is free to move horizontally on a track plate against a load cell.

Horizontal reactions are monitored using the integral load cell within the track plate and its output fed into the HDA200 Interface (sold separately). Frame deflection and sway is measured using the dial gauges supplied. Load hangers, calibrated weights, cords and pulleys are provided to apply vertical and/or horizontal loading to the frames.

Specifications and resources

Rectangular Portal: 600mm (W) x 450mm (H)
“S” Frame with roller: 600mm (W) x 600mm (H)
Steel Portal Frame material: 25mm (W) x 8mm (t)
Weights Set: 2 x 0.1N, 4 x 0.2N, 1 x 1N, 2 x 2N, 6 x 5N, 2 x 20N, 1 x 50N.
Load Cell: 0…500N
Digital Dial Gauge: 12.7mm travel; 0.01mm resolution