Product number: H352D
The accessory includes three plates with integral heaters and temperature sensors that are each designed to fit the aperture in the Cross Flow Heat Exchanger H352 duct.

A heated flat plate with surface thermocouple may be directly compared with a similar pinned plate and finned plate also fitted with a surface thermocouple. In addition to expand understanding of the heat transfer enhancement from extended surfaces, the pinned and finned plates each have three thermocouples arranged at intervals along a fin and a pin.

Each of the plates plug directly into the Cross Flow Heat Exchanger H352 instrumentation console and this allows measurement of the low voltage power supplied to the heater and the surface temperatures. The instrumentation console also limits the active element surface temperature to approximately 100°C.

Specifications and resources

Flat Plate HE: 100W heater mat, aluminium plate
Pinned Plate HE: 100W heater mat; aluminium plate with 25 pins.
Finned Plate HE: 100W heater mat, finned aluminium plate.